Cisco ASR 9000 Series Software Manual page 38

Label Switched Multicast (LSM) Multicast Label Distribution Protocol (mLDP) based Multicast VPN (mVPN) Support
For profile 1 (MLDP Rosen), the mdt default mldp ipv4 command and for profile 4/5 (MS- PMSI with
BGP-AD), the mdt partitioned mldp ipv4 mp2mp/p2mp command are configured.
• Configuring the Route Distinguisher
• Configuring Data MDTs (optional)
• Configuring BGP MDT address family
• Configuring BGP vpnv4 address family
• Configuring BGP IPv4 VRF address family
• Configuring PIM SM/SSM Mode for the VRFs
Cisco ASR 9000 Series Aggregation Services Router Multicast Configuration Guide, Release 5.1.x
38
◦ configure
◦ multicast-routing vrf vrf_name
◦ address-family ipv4
◦ mdt default mldp ipv4 root-node
◦ configure
◦ router bgp AS Number
◦ vrf vrf_name
◦ rd rd_value
◦ configure
◦ multicast-routing vrf vrf_name
◦ address-family ipv4
◦ mdt data <1-255>
◦ configure
◦ router bgp AS Number
◦ address-family ipv4 mdt
◦ configure
◦ router bgp AS Number
◦ address-family vpnv4 unicast
◦ configure
◦ router bgp AS Number
◦ vrf vrf_name
◦ address-family ipv4 unicast
◦ configure
Implementing Layer-3 Multicast Routing on Cisco IOS XR Software