Cisco ASR 9000 Series Software Manual page 30

Label Switched Multicast (LSM) Multicast Label Distribution Protocol (mLDP) based Multicast VPN (mVPN) Support
• MoFRR in the core is supported.
• There is one core tree built per VRF-S,G route. There can be no ( *,G) routes in VRF, with RPF
reachability over the core.
• The multicast traffic can be SM S,G or SSM.
Profile 7: Global Inband Signalling
These are the characteristics of this profile:
• P2MP mLDP inband tree in the core; no C-multicast Routing.
• Customer traffic can be SM S,G or SSM.
• Support for global table S,Gs on PEs.
For more information on MLDP implementation and OAM concepts, see the Cisco IOS XR MPLS
Configuration Guide for the Cisco ASR 9000 Series Router
Profile 8: Global P2MP-TE
These are the characteristics of this profile:
• P2MP-TE tree, with static Destination list, in the core; no C-multicast Routing.
• Static config of (S,G) required on Head-end PE.
• Only C-SSM support on PEs.
• Support for global table S,Gs on PEs.
Profile 9: Rosen-mLDP with BGP-AD
These are the characteristics of this profile:
• Single MP2MP mLDP core-tree as the Default-MDT, with PIM C-multicast Routing.
• All UMH options supported.
• Default and Data MDT supported.
• Customer traffic can be SM or SSM .
• RIB-Extranet, RPL-Extranet, Hub & Spoke supported.
• Customer-RP-discovery (Embedded-RP, AutoRP & BSR) is supported.
Profile 10 : VRF Static-P2MP-TE with BGP AD
These are the characteristics of this profile:
• P2MP-TE tree, with static Destination list, in the core; no C-multicast Routing.
• Static config of (S,G) required on Head-end PE.
• Only C-SSM support on PEs.
• Support for IPv4 MVPN S,Gs on PEs. No support for IPv6 MVPN routes.
Cisco ASR 9000 Series Aggregation Services Router Multicast Configuration Guide, Release 5.1.x
30
Implementing Layer-3 Multicast Routing on Cisco IOS XR Software