Cisco ASR 9000 Series Software Manual page 109

Implementing Layer-3 Multicast Routing on Cisco IOS XR Software
Command or Action
interface all enable
Step 4
commit
Configuring an Interface for a Non-default VRF Instance
SUMMARY STEPS
1. configure
2. interface type interface-path-id
3. vrf vrf-name
4. ipv4 address address mask
5. commit
DETAILED STEPS
Command or Action
Step 1
configure
Step 2
interface type interface-path-id
Example:
RP/0/RSP0/CPU0:router(config)# interface tengige 0/1/0/0
Step 3
vrf vrf-name
Example:
RP/0/RSP0/CPU0:router(config-if)# vrf name1
Step 4
ipv4 address address mask
Example:
RP/0/RSP0/CPU0:router(config-if)# ipv4 address 10.1.1.1
255.0.0.0
Step 5
commit
Cisco ASR 9000 Series Aggregation Services Router Multicast Configuration Guide, Release 5.1.x
Configuring an Interface for a Non-default VRF Instance
Purpose
Purpose
Enters PIM address-family IPv4 submode.
Sets the VRF for the interface.
Sets the IPv4 address for the interface.
109