Chapter 41: Migrating Ip Deskphones With Unistim Firmware From Cs 1000 To Ip Office - Avaya 1230 Administration

Chapter 41: Migrating IP Deskphones with
Related Links
IP Deskphone migration
Overview on page 401
Requirements on page 402
Before you begin on page 402
Migrating IP Deskphones with UNIStim firmware from CS 1000 to IP Office
Overview
It is assumed that the IP Deskphones connect to IP Office through TCP.
Note:
Avaya recommends that a single IP Deskphone of each type be migrated first to verify that the
setup is correct.
For large installations, it is not recommended that all IP Deskphones be migrated at the same
time.
This chapter does not describe how to configure CS 1000, IP Office, or third-party applications such
as the DHCP and TFTP servers. For this information, refer to the appropriate product
documentation.
This chapter does not provide information on how to migrate the CS 1000 users and their profiles
over to IP Office. If using this procedure to perform the migration, then the IP Deskphone users must
manually input their login and password after migration in order to register on IP Office and obtain
telephony services. Configuring IP Deskphone auto-registration requires knowledge of which IP
Deskphones belong to which users and the passwords for all users; this is out of scope of this
procedure.
Related Links
Migrating IP Deskphones with UNIStim firmware from CS 1000 to IP Office
March 2015
UNIStim firmware from CS 1000
to IP Office
on page 392
SIP Software for Avaya 1200 Series IP Deskphones-Administration
Comments? infodev@avaya.com
on page 402
on page 401
401