Create The Ip Deskphone-Specific Configuration File - Avaya 1230 Administration

Creating the provisioning files
1000 system, it is necessary to configure an authentication name when configuring IP
Deskphone features.
- YES – prompt the user to enter an authentication name.
- NO – authentication name is not configured.
• AUTOLOGIN_AUTHID_KEY[nn] [xx] — This parameter specifies the authentication name to
be used for a specific key.
- [nn] = the key number (01 – maximum number of keys supported on the IP Deskphone)
- [xx] = the authorization ID for that key's login

Create the IP Deskphone-specific configuration file

If the IP Deskphone encounters a [USER_CONFIG] section while parsing the 12x0SIP.cfg
configuration file, the IP Deskphone downloads the IP Deskphone-specific configuration file
SIP<MAC ID>.cfg from the provisioning server.
IP Deskphone-specific configuration files support customizing the IP Deskphone on a
IP Deskphone/user level. Parameters in the device configuration file can be overwritten with a
IP Deskphone-specific configuration file.
Most of the parameters in the IP Deskphone configuration file are saved on the IP Deskphone.
Removing a parameter from the IP Deskphone configuration file does not change the parameters
saved on a configured IP Deskphone. If a parameter is configured only in the IP Deskphone-specific
configuration file, removing the IP Deskphone-specific configuration file does not clear the setting.
Important:
If the 12x0SIP.cfg configuration file contains a [USER_CONFIG] section, Avaya recommends
that DOWNLOAD_MODE be configured as FORCED. This is a global setting for all
IP Deskphones used to determine if the MAC ID file should be read. Alternatively, if the user
wants to use DOWNLOAD_MODE configured to AUTO, then when a change is made to any
MAC ID file the version number should be incremented so that all IP Deskphones read the file.
Create the Dialing Plan file
If the IP Deskphone encounters a [DIALING_PLAN] section while parsing the 12x0SIP.cfg
configuration file, the IP Deskphone downloads the specified dialing plan configuration file from the
provisioning server.
A dialing plan essentially describes the number and pattern of digits that a user dials to reach a
particular telephone number. Access codes, area codes, specialized codes, and combinations of the
number of digits dialed are all part of a dialing plan.
The purpose of the dialing plan is so that the end user does not have to press the send or pound
key (#) to have the IP Deskphone with SIP Software send the initial message to start the call.
SIP Software for Avaya 1200 Series IP Deskphones-Administration
96
Comments? infodev@avaya.com
March 2015