Cpu Load Monitor - Avaya 1230 Administration

1200 series software
Hide thumbs Also See for 1230:
Table of Contents

Advertisement

Diagnostics and troubleshooting
• Monitors important tasks. The Task Monitor scans these tasks, and if any task is lost without a
reason, the Task Monitor logs the error and recovers the IP Deskphone.

CPU Load Monitor

The CPU Load Monitor tracks the CPU usage. If the CPU load reaches 100 percent and stays at
that level for more than 1 minute, the CPU Load Monitor logs the appropriate error (including the list
of most suspect tasks that could occupy the CPU), and recovers the IP Deskphone.
Stack Overflow Monitor
The Stack Overflow Monitor tracks the stack of all tasks in the real-time mode, detects the stack
overflow or corruption, and logs the task trace.
Traffic Monitor
The Traffic Monitor monitors incoming and outgoing IP and SIP traffic and registers events in the
ECR-log file when the traffic exceeds predefined thresholds. The Traffic Monitor also registers the
content of the incoming and outgoing SIP packages.
PDT commands
The Problem Determination Tool (PDT) is a troubleshooting tool for the IP Deskphone. The PDT has
powerful functions which allow you to perform special testing actions, and can display the content of
any log files. The PDT helps to identify the origin of the problem under investigation, reduces the
amount of time it takes to reproduce a problem with the proper RAS tracing levels set (trace levels
are set automatically by the tool), and reduces the effort required to send the appropriate log
information to technical support.
The PDT provides remote access to the IP Deskphone with the problem, using SSH session.
Access is restricted by admin ID and password.
SSH can be enabled manually or through provisioning.
Enabling SSH manually:
Steps to enable SSH on an IP Deskphone manually:
1. Open the Device Settings dialog.
2. Check to see if theEnable SSH parameter checkbox is displayed and the checkbox is
checked. If theEnable SSH parameter checkbox is not displayed, do the following:
• Press the Auto soft key and uncheck the 18. SSH Enable checkbox in the Auto
Provisioning window.
SIP Software for Avaya 1200 Series IP Deskphones-Administration
352
Comments? infodev@avaya.com
March 2015

Advertisement

Table of Contents
loading

This manual is also suitable for:

1220

Table of Contents