Table of Contents
Advertisement
Administrator configuration
To add a VPNremote Phone user
1. Select the Configure>Users>Remote Users property. Click Add. The Add Remote User
screen is displayed.
2. Enter the user name and password.
The user name can be up to 255 characters long and can contain any character except a
comma (,).
3. (Optional) To change the default settings for IKE, split tunneling, or security, click
Advanced. The Remote User Advanced Settings dialog is displayed.
4. Change the advanced settings as required, including:
From the list select either IP address, DNS name, directory name, or e-mail ID.
●
Note that Enable Split Tunneling is checked.
●
Select a security option.
●
5. Click OK to close the Advanced Settings screen and return to Add Remote User.
6. Click Save to add the remote user.
Converting an IP Telephone to VPN IP Telephone
Use the following procedure and the telephone key pad to convert a non-VPNremote IP
telephone into a VPNremote telephone:
1. Allow the telephone to boot and register with Communication Manager.
2. After the phone is registered, set the GROUP for each phone you want to upgrade to a VPN
IP telephone to 876. To initiate the GROUP command from the telephone key pad, press:
Mute 4-7-6-8-7 #
3. After the GROUP command is initiated, enter 8-7-6 # (V-P-N #) for the New value. Use
Page LEFT key to erase any errors.
4. Press # to save the new value.
Save new value?
* = no #=yes
12 Administrator Guide
Advertisement
Table of Contents
