Avaya 1230 Administration page 201

The sections in the custom keys file can be in any order. Each section contains parameters and
values. All parameters should contain values, except for the following:
• banner
• hotlineURL
If a parameter has no value, its previous value is restored. For parameters which are allowed blank
values, if the parameter is blank then the value is cleared.
The custom keys file supports sections which contain user preferences. This file has the same
format as the prefs.txt file which is stored on the flash of the IP Deskphone. After downloading the
custom keys file, this information is merged with information from the user profile (file prefs.txt). If
the parameter has a new value in the custom keys file, then the old value is replaced. If any
parameter is not provisioned through the custom keys file, the old parameter with its corresponding
value is used. After the merge, the new data is written on the flash to the prefs.txt file. This
information is then used by the profile manager.
Note:
The label for a programmable key can be modified by the IP Deskphone end-user through the
phone UI in the Feature Options > Feature Keys menu. If the end-user enters a blank label for
a key that has a default label defined in the custom keys file, then that default label overrides
the blank label and is applied to the key
The following table describes the sections and keys, and provides examples.
Section name
[audiocodecs]
[autoanswer]
[key]
March 2015
Key Value example
str-0 PCMU
str-1 G729
str-0 3007@mycompany.co
m
icon 5
index 3
label CallForward
target *4
SIP Software for Avaya 1200 Series IP Deskphones-Administration
Comments? infodev@avaya.com
Roaming profiles
Description
The priority-ordered list of codecs
The key consists of prefix "str-" and
the sequence number 0,1...
The value can be any supported
codec.
The list of allowed addresses from
whom auto-answer requests should
be accepted.
Contains special section(s) for
describing configuration for the
programmable keys.
Icon number; codes are defined in
the "Tab. 1. Icon definition"
Key number; sequential, starting with
the IP Deskphone, then the
Expansion Module(s)
Text to be displayed for the key
Information number to be sent to IP
Office
Table continues...
201