Avaya 1230 Administration page 120

Install the SIP software
Note:
Only a TFTP server can be used for a manual download.
1. Assemble the components of the new IP Deskphone, as described in
IP Deskphone
2. Plug in the IP Deskphone.
The IP Deskphone Message Waiting LED is lit and the message
...Loading BootC...
is displayed.
In a few seconds, the following simple non-graphic text menu on white background is
displayed.
3. Press the soft keys (1,2,3,4) in sequence from left to right.
BootC goes to manual configuration and the following menu is displayed on the IP
Deskphone screen.
Apply
Note:
If you miss this screen and the IP Deskphone begins to look for DHCP, unplug the IP
Deskphone, and repeat Step 2.
4. Press the Auto soft key.
The following menu is displayed.
Man
5. Use the down arrow in the Navigation keys to scroll down and select 02 LLDP Enable.
Man
6. Press the Man soft key to manually configure LLDP.
7. Press the Cfg soft key.
8. Configure the following:
• DHCP = 0
• IP = <IP Deskphone IP address>
SIP Software for Avaya 1200 Series IP Deskphones-Administration
120
on page 115 or in the user guide of the appropriate IP Deskphone model.
Manual Configuration
The End of Menu
Auto
01 EAP Settings
Cfg
02 LLDP Enable
Cfg
Comments? infodev@avaya.com
12x0 IP Phone
Avaya
AllMan
AllMan
Install the
Cancel
Cancel
Cancel
March 2015