Avaya 1230 Administration page 355

# Command
19 routeshow
20 arp
21 listcerts
22 printcert <index>
23 sipapp <start | stop>
24 sendunistim <xx xx....>
25 rxunistim <on | off
26 txunistim <on | off
27 sendevent <0xmmm <0xnnn>
28 lcdparam
29 audio <hs | hd | hf | off>
30 display <on | off>
31 keypress <on | off>
32 clearlog >clearlog<mngr_dest>
33 removelog
>removelog<mngr_dest>
34 reset2factory >reset2factory
You can request the following commands to the support team if you have any issues:
• printSetInfo
• prtcfg
• prtlog 0
• prtlog 1
March 2015
Description
Displays host and network routing tables and stats
Displays entries in the system ARP table
Lists all trusted certificates
Displays certificate details
Starts or stops the SIP application
Sends UNIStim message
Displays UNIStim messages from the Core
Displays UNIStim messages to the Core from the SIP
application
Simulates an UNIStim event.
Sets up LCD parameters for the IP Deskphone
Loopbacks audio to handset/headset/Handsfree
Turns all LCD and LED on or off
Turns all key presses on or off
Clears content of the specified log file. The input
parameter specifies the type of logging manager:
• 0 (default) — ECT-log file
• 1 — SIP-log file
If the input parameter is incorrect, the following
notification appears:
>clearlog: incorrect type of manager <x>
Removes the specified log file.
The input parameter specifies the type of logging
manager:
• 0 (default) — ECR-log file
• 1 — SIP-log file
If the input parameter is incorrect, the following
notification appears:
>removelog: incorrect type of manager <x>
Resets the IP Deskphone to the default setting. See
Activating Reset to Factory Setting using SSH_PDT
page 329.
SIP Software for Avaya 1200 Series IP Deskphones-Administration
Comments? infodev@avaya.com
PDT commands
on
355