Avaya 1230 Administration page 195

The following table describes the function of the context-sensitive soft keys for the Auto Retrieve
screen.
Table 62: Context-sensitive soft keys for the Auto Retrieve screen
Context-sensitive soft key
Yes
No
Back
If the Auto Retrieve behavior is enabled on a Speed Dial key (programmed keys) or Speed Dial List
entry that is invoked, and a call is placed on hold to invoke the current key or entry, the IP
Deskphone attempts to remove the call on hold after the key or entry call is complete.
The following is a description of how the Auto Retrieve function operates.
1. A is talking to B when A invokes the Speed Dial List and selects an entry.
2. The call between A and B is placed on hold, and A places another outgoing call to C (a URI
specified in the Speed Dial List entry).
3. When the call between A and C is complete, if the Auto Retrieve flag is enabled for the
Speed Dial, then the IP Deskphone attempts to take the call between A and B off hold.
If another call comes in during the call between A and C, or if the state of the call between A
and B changes when the call between A and C is active, the re-connection of the call
between A and B may not always happen.
March 2015
Action
Enables the Speed Dial Auto Retrieve behavior.
Disables the Speed Dial Auto Retrieve behavior.
Dismisses the screen and returns you to the
previous key programming screen.
SIP Software for Avaya 1200 Series IP Deskphones-Administration
Comments? infodev@avaya.com
Speed Dial List
195