Introduction - Avaya 1230 Administration

Chapter 10: Upgrade and convert the

Introduction

This chapter describes how to upgrade an Avaya 1200 Series IP Deskphone with UNIStim software
to SIP Software.
In order to upgrade an IP Deskphone with UNIStim software, first determine if you have the
minimum UNIStim software release on the IP Deskphone (062AC5L ). If your IP Deskphone is
installed with the minimum version of UNIStim software, proceed to the section
software to SIP software on the IP Deskphone
with the minimum version of UNIStim Software, proceed to the section
UNIStim Software on page 124.
To convert the firmware on the IP Deskphone from SIP to UNIStim, see the section
page 328.
Upgrade the SIP Software on the IP Deskphone
Use the following procedures to upgrade existing SIP Software to new SIP Software on the
IP Deskphone.
Download the SIP software to the provisioning server
To download the SIP software, perform the following procedure.
Downloading SIP Software for the IP Deskphone
1. Go to http://www.avaya.com/support.
The Avaya Support page appears.
2. Click Downloads & Documents in the menu at the top of the page.
3. Enter the IP Deskphone type in the Enter Your Product Here box.
4. From the Choose Release drop down list, select the desired release of SIP software.
5. In the Select a content type pane, click the Downloads radio button and click Enter.
SIP Software for Avaya 1200 Series IP Deskphones-Administration
122
IP Deskphone software
on page 127. If your IP Deskphone is not installed
Comments? infodev@avaya.com
Convert UNIStim
Upgrade to the minimum
Maintenance
March 2015
on