Reset Factory Settings Support - Avaya 1230 Administration

Reset Factory Settings support

A configured IP Deskphone can be reset to factory defaults to clear all stored information and
preference data. By activating this mode, the data stored on the IP Deskphone is erased, and the
administrator can reconfigure it for a new user.
The IP Deskphone resets data stored in the EEPROM to factory defaults and erases files in TFFS.
There are two ways to activate Reset to Factory Settings:
1. by entering a Special Key Sequence (SKS), or
2. remotely using SSH-PDT.
After you activate Reset to Factory Settings, the action is registered in the ECR-log file.
Activating Reset to Factory Setting by SKS
1. At any point while the IP Deskphone is operating, press the Special Key Sequence (SKS).
2. Enter the following command:
**73639<MAC>## (or **renew<MAC>##)
For example, the MAC-address, A1B2C3D4E5F6 , can be translated to 212223343536 .
Therefore, the SKS would be **73639212223343536## .
After the proper sequence is entered on the IP Deskphone, the confirmation screen appears.
3. Press the YES context-sensitive soft key to reset to factory setting.
Or
Press the NO context-sensitive soft key to close the confirmation screen and return to
regular mode.
The following table describes the function of the Context-sensitive soft keys for Reset to Factory
Setting.
Table 102: Context-sensitive soft keys for Reset to Factory Setting
Context-sensitive soft key
Yes
No
Activating Reset to Factory Setting using SSH_PDT
1. Enter the PDT-command:
>reset2factory
The PDT displays the prompt:
>Reset to Default... Are you sure[Y/N]?
2. Enter Y to accept.
OR
March 2015
Action
Activates Reset to Factory Setting.
Rejects Reset to Factory Setting, closes the
confirmation screen, and returns to regular mode.
SIP Software for Avaya 1200 Series IP Deskphones-Administration
Comments? infodev@avaya.com
Reset Factory Settings support
329