Avaya 1230 Administration page 138

Provisioning the IP Deskphone Device Settings
Config option
Enable Data 802.1Q
Data VLAN
Data Priority bits
PC-Port Untag all
Cached IP
Ignore GARP
Provisioning
SIP Software for Avaya 1200 Series IP Deskphones-Administration
138
Options or input
Force Half
Checked
Unchecked
No VLAN
Enter VLAN ID
Auto
0 to 7
Checked
Unchecked
Checked
Unchecked
Checked
Unchecked
Server URL
Protocol:
• TFTP
• FTP
• HTTP
• HTTPS
Device ID
Comments? infodev@avaya.com
Description
Forced half duplex.
802.1Q header and features used.
802.1Q not used.
Data VLAN not used.
VLAN ID entered 1 to 4094.
Use value from the info block or
default of 7.
Force all priority bits to chosen
value.
Removes the 802.1Q header from
a packet before it forwards to the
IP Deskphone PC port.
Leave 802.1Q header on packets
destined to the PC port.
Last IP Deskphone IP address info
received is used if DHCP server
not reached.
Must receive response to assign
IP Deskphone IP address.
IP Deskphone ignores Gratuitous
ARP requests.
IP Deskphone responds to
Gratuitous ARP requests.
Provisioning server IPv4 or IPv6
IP address.
Note:
Maximum of 1 Provisioning
Server IP address can be
configured.
Provisioning protocols.
Note:
If IPv6 is enabled, only FTP
protocol can be used.
ID used by provisioning server to
authenticate the IP Deskphone.
Enter the User ID as the Device
ID. TFTP does not require Device
ID.
Table continues...
March 2015