Ip Office Ip Phones; Introduction - Avaya IP Office 3.2 Installation Manual

IP Office IP Phones

Introduction

This guide covers the installation of Avaya H.323 IP phones on IP Office systems. Currently, the
following H.323 IP phones are supported on IP Office 3.2.
H.323 IP Models
Phones
4600 Series 4601, 4602, 4602SW,
4606, 4610SW, 4612,
4620, 4620SW, 4621SW
4624, 4625.
5600 Series 5601, 5602, 5602SW,
5610SW, 5620, 5620SW,
5621.
3600 Series 3616, 3620 and 3626.
PC IP Office Phone Manager
Softphone Pro PC Softphone.
Other H.323 IP telephony devices are supported through the entry of an IP Office IP Endpoint license
into the IP Office configuration. However, no functionality on these devices beyond basic call answering
and making is guaranteed by Avaya. Therefore, installation of these devices should be thoroughly tested
before any customer deployment.
The maximum number of H.323 IP phone devices supported by any IP Office system is based on that
system's maximum capacity for extensions of any type, minus the number of non-IP extensions installed
on the control unit and any expansion modules. The number of simultaneous calls between IP and non-
IP devices will also be limited by the number of VCM channels installed in the IP Office unit.
Phone Installation Guide
IP Office 3.2
Note
These are H.323 IP phones supported on a
number of Avaya phone systems.
These are H.323 IP phones that are supported
on IP Office only.
These are 801.11b wireless H.323 IP phones.
They work with a Avaya Voice Priority Processor
(AVPP) unit and a range of wireless Access
Points.
This is a VoIP enabled installation of the IP Office
Phone Manager software. It is not covered in this
manual. Refer to the Phone Manager Installation
and Maintenance Manual for details.
IP Office
Unit
Small Office Edition
IP403
IP406 V1
IP406 V2
IP412
Maximum Maximum
Extensions VCM Channels
28 3 or 16
100 20
180 20
190 30
360 60
15-601042 Issue 11e (27th June 2006)
Page 1