Login Local - D-Link DES-7200 Cli Reference Manual

DES-7200 CLI Reference Guide
Parameter
description
Command
mode
Usage
guidelines
Examples
Related
commands
2.1.15
In case the AAA is disabled, to enable local user authentication on the interface,
execute the interface configuration command login local. The no form of this
command is used to delete the line local user authentication.

login local

no login local
Parameter
description
Command
mode
Chapter 2 Switch Management Configuration Commands
Parameter
default
list-name
Line configuration mode.
If the AAA security server is enabled, this command is
used for the logon authentication with the specified method
list.
The example below shows how to associate method list on
VTY and perform logon authentication with radius.
DES-7200(config)# aaa new-model
DES-7200(config)# aaa authentication login default radius
DES-7200(config)# line vty 0
DES-7200(config-line)# login authentication default
Command
aaa new-model
aaa
authentication
login
login local
N/A.
Line configuration mode.
.
Description
Name of the default authentication
method list
Name of the method list available
Description
Enable the AAA security service
Configure the logon authentication
method list
2-13