D-Link DES-7200 Cli Reference Manual page 12

DES-7200 CLI Reference Guide
2.1.2
To enter into the privileged user mode, execute the normal user configuration
command enable.
For the details of the command, see the Security Configuration Command
Reference.
2.1.3
To configure the password for different privilege level, execute the global
configuration command enable password. The no form of this command is
used to delete the password of the specified level.
enable password [level level] {password | [0|7] encrypted-password}
no enable password [level level]
Parameter
description
Command
mode
Chapter 2 Switch Management Configuration Commands
enable
enable
password
Parameter
Password
Level
0|7
encrypted-password
Global configuration mode.
.
Description
Password for user to enter into the
EXEC configuration layer
User's level.
Password encryption type, "0" for
no encryption, "7"
encryption
Password text.
for simple
2-2