D-Link DES-7200 Cli Reference Manual page 41

DES-7200 CLI Reference Guide
2.2.11
To set the prompt command, run the prompt command in the global
configuration mode. To delete the prompt setting, run the no prompt command.
prompt string
Parameter
description
Command
mode
Usage
guidelines
Examples
2.2.12
To restart the device system, execute the privileged user command reload.
reload [ text | in [ hh: ] mm [ text ] | at hh:mm [month day year ] [ text ] | cancel ]
Parameter
description
Chapter 2 Switch Management Configuration Commands
DES-7200(config)# hostname BeiJingAgenda
BeiJingAgenda(config)#
prompt
Parameter
string
Global configuration mode.
If you have not set the prompt string, the prompt string is
the system name, which varies with the system name. The
prompt command is valid only in the EXEC mode.
Set the prompt string to DES-7210:
DES-7200(config)# prompt des-7210
DES-7210(config)# end
DES-7210#
reload
Parameter
text
in mmm hh:mm
at hh:mm
month day year
month
day
year
.
Description
Character string of
command. The maximum length is 32
letters.
Description
Cause to restart, 1-255 bytes
The system is restarted after specified
time interval.
The system is restarted at the specified
time. Up to 200 days is supported
Month in the range
December
Date in the range 1 to 31
Year in the range 1993 to 2035
the prompt
January to
2-31