D-Link DES-7200 Cli Reference Manual page 68

DES-7200 CLI Reference Guide
Commands
Command
mode
Usage
guidelines
Examples
Platform
description
Chapter 5 Network Connectivity Test Tool Configuration
Privileged mode.
The ping command can be used in the ordinary user mode
and the privileged mode. In the ordinary mode, only the
basic functions of ping are available. In the privileged
mode, in addition to the basic functions, the extension
functions of the ping are also available. For the ordinary
functions of ping, five packets of 100Byte in length are sent
to the specified IP address within the specified period (2s
by default). If response is received, '!' is displayed. If no
response is received, '.' displayed, and the statistics is
displayed at the end. For the extension functions of ping,
the number, quantity and timeout time of the packets to be
sent can be specified, and the statistics is also displayed in
the end. To use the domain name function, configure the
domain name server firstly. For the concrete configuration,
refer to the DNS Configuration section.
The example below shows the ordinary ping.
DES-7200# ping 192.168.5.1
Sending 5, 100-byte ICMP Echoes to 192.168.5.1, timeout
is 2 seconds:
< press Ctrl+C to break >
!!!!!
Success rate is 100 percent (5/5), round-trip min/avg/max
= 1/2/10 ms
The example below shows the extension ping.
DES-7200# ping 192.168.5.197 length 1500 ntimes 100
timeout 3
Sending 100, 1500-byte ICMP Echoes to 192.168.5.197,
timeout is 3 seconds, data ffff source 192.168.4.10:
< press Ctrl+C to break >
!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!
!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!
Success rate is 100 percent (100/100), round-trip
min/avg/max = 2/2/3 ms
DES-7200#
The command is supported by all equipments.
.
5-2