Table of Contents
Advertisement
Chapter 1 General Description
3.2
Management Features
The hardware components of the server provide operation control/reliability features as shown below.
Additionally, NEC ESMPRO Agent, which is provided in EXPRESSBUILDER, enables you to collectively
manage the state of your systems. You can also monitor the server states from a PC to manage the network
where NEC ESMPRO Manager provided in EXPRESSBUILDER is installed.
The features available on this server are as shown in the table below.
Function
Hardware
System
I/O device
System
environment
Software
Network
BIOS
Local polling
Storage
File system
RAID System
Others*
: Partially supported. ×: Unsupported.
: Supported.
*: Not displayed on the NEC ESMPRO Manager screen.
28
Availability
Memory bank
Device info
CPU
Temperature
×
Fan
Voltage
×
Power supply
×
Door
Tips
NEC ESMPRO Manager and NEC ESMPRO Agent are supplied with the server
as standard. For how to install and use each software component, refer to the
explanation of the component.
Express5800/B120e User's Guide
Description
Shows physical hardware information.
Shows physical memory information.
Shows information specific to the server.
Shows physical CPU information.
Shows logical CPU information and monitors the load factor.
Shows logical memory information and monitors the status.
Shows information on I/O devices (floppy disk drive, serial ports,
parallel port, keyboard, mouse, and video).
Monitors temperatures, fans, voltage, power supply, door, and
others.
Monitors the temperature inside of the chassis.
Monitors the fans.
Monitors the voltage inside of the chassis.
Monitors the power supply unit.
Monitors Chassis Intrusion (open/close state of chassis cover or
door).
Shows service, driver, and OS information.
Shows network (LAN) information and monitors packets.
Shows BIOS information.
Monitors the values of MIB items obtained by NEC ESMPRO Agent.
Monitors controllers and storage devices including Solid State
Drives.
Shows the file system configuration and monitors the free space.
Monitors the following RAID Controller:
N8404-003F Storage and I/O Blade AD106b
Monitors OS stall using the Watch Dog Timer.
Performs alert processing after an OS STOP error occurs.
3. Standard Features
Advertisement
Table of Contents
