ABB REU 610 Technical Reference Manual page 59

1MRS755972
Table 5.1.14.-1 Information mapping of configuration set 1 and 2
Event reason
Disturbance recorder
Triggered/Cleared
HMI password Opened/
Closed
59P-1 Pickup/Reset
59P-1 Trip/Reset
59P-2 or 47 Pickup/Reset
59P-2 or 47 Trip/Reset
27P-1 Pickup/Reset
27P-1 Trip/Reset
27P-2 or 27D Pickup/
Reset
27P-2 or 27D Trip/Reset
59N-1 Pickup/Reset
59N-1 Trip/Reset
59N-2 Pickup/Reset
59N-2 Trip/Reset
Trip Lockout/Reset
External Trip/Reset
CBFAIL Activated/Reset
PO1 Activated/Reset
PO2 Activated/Reset
Voltage Relay
Technical Reference Manual - ANSI Version
Function type and information number are mapped into configuration sets
according to the IEC 60870-5-103 standard to the extent that these have been
defined by the standard. If not defined by the standard, the type of function
and/or the information number are/is mapped into a private range.
The tables below indicate the information mapping of the corresponding
configuration sets. The column GI indicates whether the status of the
specified information object is transmitted within the general interrogation
cycle. The relative time in messages with the type identification 2 is
calculated as a time difference between the occurred event and the event
specified in the column Relative time. The measurand multiplied by the
normalize factor is proportional to the rated value. Therefore, the maximum
value of each measurand is the normalize factor multiplied by the rated value.
E31/E32 X
E33/E34 X
1E1/1E2 X
1E3/1E4 X
1E5/1E6 X
1E7/1E8 X
1E9/1E10 X
1E11/1E12 X
1E13/1E14 X
1E15/1E16 X
1E17/1E18 X
1E19/1E20 X
1E21/1E22 X
1E23/1E24 X
1E25/1E26 X
1E27/1E28 X
1E29/1E30 X
2E1/2E2 X
2E3/2E4 X
X 178 100
X 178 101
X 165 84
X 165 90
X 165 94
X 165 91
X 166 84
X 166 90
X 166 94
X 166 91
X 170 84
X 170 90
X 170 94
X 170 91
X 10 223
X 10 222
X 160 85
X 251 27
X 251 28
REU 610
- - 1
- - 1
X 1E1 2
- 1E1 2
X 1E5 2
- 1E5 2
X 1E9 2
- 1E9 2
X 1E13 2
- 1E13 2
X 1E17 2
- 1E17 2
X 1E21 2
- 1E21 2
X - 1
- - 1
- - 1
X - 1
X - 1
59