Quality - Circutor CVM k2 User Manual

Parameters that can be configured on this screen follow:
• :
PRIM. U.
• :
SEC. U.
• PRIM. I. :
•
PRIM. I .
n
• :
Sec. I.
To store the modified parameters in memory, press
saving changes press

4.2. QUALITY

To access the power supply quality parameters configuration screen, position the cursor over
and press
quality
30
Primary on the voltage transformers. If it does not exist,
program . The maximum configurable value is
1
Secondary on the voltage transformers. If it does not exist,
program . The maximum configurable value is a 3 digit number
1
Primary on the current transformer. The maximum configurable value is
: Primary on the current transformer for the neutral line. The maximum
configurable value is
The default value is
current that is calculated, configure
Secondary on the current transformer. It is possible to program
(f3).
ESC
WARNING: The CVMk2 power calculation is limited according to the
following ratio:
(Prim V) x (Prim I) < 45.000.000
Two options are provided in the quality menu,
SET.
CVmk2 has no battery. When supply falls down the analyzer do not store electrical
parmeters and no quality events. Is very important to guarantee the supply of the
device from an interrupted source (Batery, SAI, ...)
30000.
. If it is desirable for the CVMk2 to show the neutral line
5
0 .
and confirm with
SET
999999.
999.
or
5 1
(f4). To exit without
OK
and
Quality
CVM k 2
30000.
.
.
Events