CVM k 2
1.3 ExPANSION CARDS
CVmk2 has a wide range of expansion cards that enable users to interact with the system or
tocommunicate with other protocols. The expansion cards and corresponding codes are in the
following table
CODIGO
M54501
M54502
M54503
M54504
M54506
M54507
M5450A
1.4 CODING FOR OTHER PARAMETERS
For coding attributes or special features or power measuring equipment, or as modules, you
must use the following encoding table.
M
5
Voltage supply
(High Voltage)
Voltage measured
(TM)
Current input
(*) The extent to voltage 110 Vac and / or measured using external transformers Wg20
measuring transformer secondary is only possible in the measurement module 402, model code
m54412. If asked this particular module should know that the display is not included and
must be requested separately. (see paragraph 1.6 ACCESSORIES)
I/O
8 opto-coupled digital inputs
8I/8O
8 optocoupled transistor digital outputs
8 analogue inputs (0/4...20 mA)
8I/4O
4 analogue outputs (0/4...20 mA)
8 opto-coupled digital inputs
8I/4O
4 relay outputs (3 NO + 1 NO/NC)
Ethernet (modbus/TCP) + SD memory
SD memory
4 analogue outputs of ± 5mA
4O/4O
4 opto-coupled digital outputs
Profibus DP
4
x
x
x
Code
85 ... 265 V a.c.
100 ... 300 V c.c
SDC 24...90 V c.c
Standard 300 / 520 V a.c
63,5 / 110 V a.c. (*)
500 / 866 V a.c.
exterior ITF (WG20)
DESCRIPCIÓN
0
0
x
x
Internal
code
0
8
0
1
3
x
3
13
Need help?
Do you have a question about the CVM k2 and is the answer not in the manual?