Perform Sub Address Transmission - Kyocera ECOSYS M8124cidn Operation Manual

Detailed Settings of FAX Functions > Sub Address Communication

Perform sub address transmission

NOTE
To use sub address transmission, check that a sub address and password have been set in the receiving
system in advance.
Encrypted transmission cannot be used in sub address transmission.
For the setting method when the machine receives originals, refer to the following:
Registering a Sub Address Box (5-18)
1
Select [FAX] on the Home screen.
2
Place the originals.
3
Specifying destination.
Select [FAX No. Entry] and enter the fax number of the other party.
NOTE
When a sub address has been registered to the destination of the Address Book, you can use the destination.
When a sub address-registered destination in the Address Book is used for a One Touch Key, you can also use
the One Touch Key.
4
Configure the settings.
1
Select [Sub Address].
2
Select [Sub Address] and enter the sub address using the numeric keys.
You can use up to 20 digits including the numbers from 0 to 9, ' (space)', '#' and '*' characters to enter a sub address.
3
Select [Password]. Enter the sub address password using the numeric keys.
You can use up to 20 digits including the numbers from 0 to 9, ' (space)', '#' and '*' characters to enter a sub address
password.
NOTE
When the machine receives originals, a sub address password is not used.
4
[OK] > [OK]
5
To transmit
Check the destination and press the [Start] key.
NOTE
When [On] is selected in [Dest. Check before Send], a destination confirmation screen is displayed when you
press the [Start] key.
Displaying the Confirmation Screen of Destinations (7-10)
5-24