Kyocera ECOSYS M8124cidn Operation Manual page 16

> Menu Map
FAX
System Menu Settings
FAX TX/RX
Common
Transmission
Reception
This is used to register an encryption key for
Encryption
encrypted communication.
Key
Registration
This feature enables our Service Center computer
FAX Remote
to access the machine over the phone and check
Diagnosis
the machine's status or look for problems.
Register the local FAX name printed in the transmit
Local FAX
terminal identification (TTI) area.
Name
Register the Local FAX name.
Local FAX
Name
Enter the local fax ID.
Local FAX ID
Register the local FAX number printed in the
Local FAX
transmit terminal identification (TTI) area.
Number
The transmit terminal identification (TTI) is the
TTI
information about the sending machine (transmit
terminal) that is printed by the receiving machine on
the received fax.
Select whether or not to use account name as local
Account Name
FAX name.
Use
Select the dialing mode according to the line type.
Dialing Mode
Set the number of redials.
Retry Times
Set whether ECM TX is performed.
ECM TX
Set the TX Start Speed.
TX Start Speed
Specify the paper type to be used for print output of
Media Type
the received fax.
When the reception size is larger than the paper
Reduce RX
size, you can reduce the print size.
Size
Reception Date/Time function adds the reception
Reception
date/time, sender information and number of pages
Date/Time
on the top of each page when the received fax is
printed out.
When received multiple pages of data are the same
Duplex
width, they can be printed out on both sides of
Printing
paper having the same width as the data.
When you receive a multi-page Statement or A5
2 in 1 Print
size original, this function prints 2 pages of the
original at a time on one Letter or A4 size sheet of
paper.
When there are multiple originals received, they are
Batch Print
output at once when reception of all pages is
completed.
xv
Description Reference
Page
8-8
8-8
8-9
5-9