Choosing From The Speed Dial - Kyocera ECOSYS M8124cidn Operation Manual

Fax transmission > Methods For Entering the Destination
2
Select the Destination.
1
Select the One Touch Keys where the destination is registered.
NOTE
You can specify the One Touch Key using one touch number by selecting the [Quick No. Search] key.
2
Select [OK].

Choosing from the Speed Dial

Access the destination by specifying the 3-digit (001 to 100) One Touch Key number (speed dial).
NOTE
Refer to the following for registering the One Touch Key.
Adding a Destination on One Touch Key (2-15)
1
Display the screen.
Select [One Touch Key].
2
Enter the speed dial number.
1
Choosing from the [Quick No. Search] key.
2
Use the numeric keys to enter the speed dial number.
3
Select [OK].
The entered destination is selected.
Broadcast Transmission
This function allows you to send the same originals to several destinations in one operation. The machine stores
(memorizes) originals to send in memory temporarily, and automatically repeats dialing and transmission to the set
destination afterwards.
NOTE
When using a group for the destination, you can send originals to up to 100 destinations in one operation.
You can use this function together with sub address communication and delayed transmission.
When direct transmission has been selected, it changes to memory transmission at the time of transmission.
1
Select [FAX] on the Home screen.
2
Select the Destination.
Enter the fax number
NOTE
If [New Destination Entry(FAX)] is set to [Prohibit], it is not possible to directly enter a fax number. Select the
destination from the Address Book or the One Touch Key.
[New Destination Entry (FAX)] (8-12)
1
Select [Add].
3-9