Choosing From The Address Book - Kyocera ECOSYS M8124cidn Operation Manual

Fax transmission > Methods For Entering the Destination
Key
Detailed Settings
4
Select [OK].
Entry of the destination finishes.
NOTE
When [On] is selected in [Entry Check for New Dest.], a confirmation screen is displayed for the entered FAX
number. Re-enter the same FAX number and select [OK].
Machine's Operation Guide
Select [New Destination] to enter the next fax number.
Broadcast Transmission (3-9)
In addition to a fax, you can include e-mail transmission and folder (SMB/FTP) transmission to send as one job.
Machine's Operation Guide

Choosing from the Address Book

Select a destination registered in the Address Book.
NOTE
For more information about how to register destinations in the Address Book, refer to the following:
Registering Destinations in the Address Book (2-11)
For details on the external address book, refer to the following:
Command Center RX User Guide
1
In the basic screen for sending, select [Address Book].
NOTE
For details on the external address book, refer to the following:
Command Center RX User Guide
Select the speed from 33,600 bps, 14,400 bps, and 9,600 bps.
TX Start Speed
NOTE
Normally the default setting should be used.
ECM is a communication mode specified by the ITU-T (International
ECM
Telecommunication Union) that retransmits data when an error occurs. Fax
machines that have ECM mode check for errors as they communicate,
preventing distortion of the image due to noise on the line and other conditions.
This is set when using encrypted transmission to send the data. For more
Encrypted
information about configuring settings, refer to the following:
Transmission
Encryption (5-33)
Description
3-7