Default Setting of FAX [System Menu] > Account Management
Communication modes subject to job accounting
•
Normal transmission
•
Delayed transmission
•
Broadcast Transmission
•
Sub address transmission
•
Encrypted Transmission
•
Manual send when dialed from this machine to the receiving system
•
Polling Reception
•
Sending Network FAX
Restriction of use function
When you have enabled job accounting, you need to enter an Account ID when performing the following operations.
•
Normal transmission
•
Delayed transmission
•
Broadcast Transmission
•
Sub address transmission
•
Printing Originals from a Sub Address Box
•
Encrypted Transmission
•
Manual send when dialed from this machine to the receiving system
•
Polling Reception
•
Sending Network FAX
IMPORTANT
You can use 'Make a call', 'Checking FAX Job History' and 'Communication Control Report Output'
functions without entering an Account ID or Administrator No.
When job accounting has been enabled, batch transmission function works only for communication to be performed for
the same Account ID. The communication to be performed with a different Account ID is not conducted as a batch
transmission.
Normally, the Local FAX Name is printed in the transmit terminal identification (TTI). However, when job accounting is
enabled and an Account ID is entered when a fax is sent, you can enable a setting to have the Account Name or Local
FAX Name, whichever was selected, be printed.
Account as Local FAX Name (8-9)
8-21