Sub Address Transmission - Kyocera ECOSYS MA2100cfx Operation Manual

Using Convenient Fax Functions > Sub Address Box Function

Sub Address Transmission

NOTE
To use sub address transmission, check that a sub address and password have been set in the receiving system in
advance.
Encrypted transmission cannot be used in sub address transmission.
For the setting method when the machine receives originals, refer to the following:
Sub Address Box Function (page 5-8)
1
2
3
4
5
Select the [FAX] key.
Place the originals.
Specify the destination.
Enter the fax number of the other party using the numeric keys.
NOTE
When a sub address has been registered to the destination of the Address Book, you can
use the destination. When a sub address-registered destination in the Address Book is used
for a One Touch Key, you can also use the One Touch Key.
Configure the function.
1 [Detail] > [Sub Address] > [Edit]
2
Enter the sub address using the numeric keys.
NOTE
You can use up to 20 digits including the numbers from 0 to 9, ' (space)', '#' and '*'
characters to enter a sub address.
3
Select the [OK] key.
4 Enter the sub address password using the numeric keys.
NOTE
You can use up to 20 digits including the numbers from 0 to 9, ' (space)', '#' and '*'
characters to enter a sub address password.
5
[OK] key > [OK] key
Send Start.
Check the destination and press the [Start] key.
NOTE
When [On] is selected in [Check beforeSend], a destination confirmation screen is
displayed when you press the [Start] key.
Confirmation Screen of Destinations (page 7-11)
5-16