Methods For Entering The Destination - Kyocera ECOSYS M8124cidn Operation Manual

Fax transmission > Methods For Entering the Destination

Methods For Entering the Destination

Entering the destination fax number with the numeric keys
The procedure for entering the destination fax number with the numeric keys is explained below.
NOTE
If [New Destination Entry(FAX)] is set to [Prohibit], it is not possible to directly enter a fax number. Select the
destination from the Address Book or the One Touch Key.
[New Destination Entry (FAX)] (8-12)
1
Display the fax number entry screen.
Select [New Destination].
NOTE
Pressing the number with the numeric keys changes the screen to the fax number entry screen.
2
Enter the fax number of the receiving system.
NOTE
Up to 64 digits can be entered.
Use the numeric keys to enter a number.
Key
Pause
Space
< >
Backspace
3
Select transmission settings.
Select [Detail].
Encrypted transmission, transmission start speed and ECM can be set.
Key
On Hook
Sub Address
Selecting this key adds about 3 seconds of waiting time during dialing For example, when
dialing the receiving system on an external line, you can use this method to insert a pause
before resuming dialing after you dial a specific number.
It is possible to enter half-width spaces in the entry of the destination number.
This is useful when checking if the destination number has been entered correctly.
Moves the cursor.
Delete the digits one by one before reentering the fax number. To delete the number entirely,
select the [Clear] key on the operation panel.
Select [On Hook] to connect to the telephone line.
When the FAX number has been entered, the machine starts dialing to the
receiving system.
After selecting this key, you can dial the number of the receiving system using
the numeric keys.
Manual Send (3-13)
Set this to transmit using a Sub Address. For detailed information on the settings
on the tab, refer to the following:
Perform sub address transmission (5-24)
Description
Description
3-6