JUKI DDL-9000C-F Instruction Manual page 53

(2) How to set (polygonal-shape stitching)
① Turning ON the teaching function
<Number of stitches input screen>
② Start teaching, and confirm data on a step-by-step basis
The input value is set to 0 (zero). Depress the pedal to start sewing. Count the number of stitches
until the sewing machine stops.
1. In the case of starting the teaching by operation on the operation panel
❺
2. In the case of starting the teaching using the pedal
❷ ❸
❹
After the completion of sewing steps (the last stitch), depress the back part
of pedal. Then, the data entered for the current step under the teaching
mode is confirmed and the screen is changed to the teaching screen for the
next step.
If no further step to be registered is present, this operation will be disabled.
– 49 –
❷ to turn ON the teaching
Press
function.
Carry out the step until its end is reached (the
last stitch is sewn). Then, press
confirm the teaching data.
Return the current screen to the sewing
screen (maintenance personnel mode).
❹ to confirm the teaching data
Press
on the current step. Press
change the current screen to the number of
stitches input screen for the next step.
If no further step to be registered is present,
this operation will be disabled.
❸ to
❺ to