JUKI DDL-9000C-F Instruction Manual page 39

Name
❶
Pattern No. button
❷
Registered character
button
❸
Sorting button
❹
Refining button
❺
New sewing pattern
creation button
❻
New cycle pattern
creation button
❼
Pattern copy button
❽
Pattern delete button
❾
Scroll (up) button

Scroll (down) button

Close button

Enter button

Display of pattern data
being selected
This button is used for displaying numbers of the registered sewing patterns
and cycle patterns.
(Cycle pattern numbers that are not registered are not displayed.)
When this button is pressed, the sewing pattern is put into the selected
state.
Display range: Sewing pattern numbers 1 to 99 and cycle patterns 1 to 9.
Sewing pattern is displayed and the pattern is put into the selected state by
pressing this button.
This button is used for sorting the registered patterns in the order of sewing
pattern number, process, part number or comment.
This button is used for displaying the refiner setting screen.
This button is used for creating a new sewing pattern.
Refer to "8-1-1. Creation of a new pattern" p.
* This button is only displayed under the maintenance personnel mode.
This button is used for creating a new cycle pattern.
"8-3. Cycle pattern" p.
Refer to
* This button is only displayed under the maintenance personnel mode.
This button is used for copying a sewing pattern or cycle pattern and
registering the copied pattern with new number.
Refer to "8-1-2. Copying a pattern" p.
* This button is only displayed under the maintenance personnel mode.
This button is used for displaying the pattern deletion confirmation message.
In the case there is only one registered pattern, the pattern cannot be
deleted.
* This button is only displayed under the maintenance personnel mode.
This button is used for displaying the previous page.
This button is used for displaying the next page.
This button is used for cancelling the selected pattern and displaying the
sewing screen.
This button is used for confirming the selected pattern and displaying the
sewing screen.
This button is used for displaying data on the pattern that is being selected.
– 35 –
Function
97.
104.
99.