Copying A Pattern - JUKI DDL-9000C-F Instruction Manual

8-1-2. Copying a pattern

The selected pattern (sewing pattern and cycle pattern) can be copied to any other pattern of the specified
number.
* This operation is to be carried out under the maintenance personnel mode.
Explanation is given below using copying of a sewing pattern as an example.
① Selecting the sewing pattern copy function
❶
<Sewing screen (Maintenance personnel mode)>
❷ ❸
<Sewing pattern number list screen>
② Select the copy destination pattern number
❹
<Sewing pattern number copy screen>
❺ ❻
1. Press
der the maintenance personnel mode.
The "sewing pattern number list screen" is
displayed.
2. Select the copy source pattern number from
list ❷ .
3. Press
The "sewing pattern number copy screen" is
displayed.
1. Enter the sewing pattern number to be reg-
istered using numeric keypad ❹ .
An unassigned registration number that
is closest to the entered value in the plus/
minus direction is displayed by pressing
2. The created pattern is registered by press-
ing
returns to the "sewing pattern number list
screen". In the case the entered number
has already been registered, the prompt
message for overwrite confirmation is dis-
played.
– 99 –
❶ on the sewing screen un-
❸ .
❺ .
❻ . Then, the current screen