JUKI DDL-9000C-F Instruction Manual page 50

(2) Setting items for the polygonal-shape stitching steps
Step 1
Item name
S071 Number of stitches
S072 Pitch
S073 Thread tension
S074 Presser foot pressure
S075 Correction of feed dog height
S076 Stop position of needle bar
S077 Stop position of presser foot
S078 One-shot
S079 Limit on sewing speed
Step 2
* Setting items and the input range are same as those of step 1.
* Step numbers can be set to Step 20.
After you have changed the setting, check to make sure that the feed dog does not come in
contact with the throat plate.
Be aware that the stitch pitch may change if you have changed the locus or the feed dog
height. It is, therefore, necessary to carry out trial stitching fi rst before using the machine
for production.
Input range
1 to 2000
-5.00 to 5.00 / Custom pitch No.1 to 20
0 to 200
-350 to 200
-4 to 8
: Stop with the needle down
: Stop with the needle up
: Thread trimming
: Continuity
0 to 15.0 mm
: OFF /
150 to U096
↓
– 46 –
: ON