JUKI DDL-9000C-F Instruction Manual page 111

❹
<Registered cycle pattern selection screen
(In numerical order)>
<Cycle sewing step edit screen>
❽ ❾
<Cycle sewing pattern number registration screen>
3. Display a desired pattern number referring
to
Press
4. Press
The current screen returns to the "new cycle
sewing step edit screen".
❺
❻
5. The selected pattern is added to cycle sew-
ing data with
Create the cycle sewing data by repeating
steps 2 to 5.
6. Press
confirmation screen.
7. Enter the sewing pattern number to be reg-
istered using numeric keypad ❽ .
An unassigned registration number that
is closest to the entered value in the plus/
minus direction is displayed by pressing
8. The created pattern is registered by press-
ing
❼
Then, the current screen returns to the
"sewing pattern number list screen". In the
case the entered number has already been
registered, the prompt message for over-
write confirmation is displayed.
– 107 –
"4-2-2. List of sewing patterns"
❹ .
❺ to confirm the setting.
suffixed.
❻ to display the data discard
❾ .
❼ .
p.34.