JUKI DDL-9000C-F Instruction Manual page 106

② Editing the number of steps of a polygonal-shape stitching pattern and the number of stitches of a
new pattern
❷
<Polygonal-shape stitching step edit screen>
❻
<Number of stitches input screen>
3. A previous step and a step consisting of 100 stitches are inserted ahead of the selected step by pressing
❸ .
"Number of stitches input screen" is displayed by pressing the inserted button.
Enter the number of stitches for the step with numeric keypad ❻ and
❽ to confirm the setting.
Press
Refer to "4-2-8. Teaching function" p.48
* In the case the maximum number of steps has already been registered,
4. The selected step is deleted by pressing
* In the case only one step has been registered,
③ Confirming the data on the created sewing pattern
<Polygonal-shape stitching step edit screen>
❸ ❹ ❺
❼ ❽
for the teaching function.
❾
1. The number of stitches (0 to 2000) for a
step is displayed in ❷ .
Press ❷ to place the number of stitches in
the selected state.
The screen returns to the previous one or
advances to the next one with
2. In the case a step(s) can be additionally
registered in the pattern, a step consisting
of zero (0) stitch is displayed at the tail end.
"Number of stitches input screen" is displayed
by pressing a step consisting of zero (0) stitch.
Enter the number of stitches for the step with
numeric keypad ❻ and
Press
❹ .
❹ is not displayed.
The operation is completed by pressing
❾ . Then, the current screen returns to the
sewing screen under the maintenance person-
nel mode.
– 102 –
❺ .
❽ to confirm the setting.
❼ .
❸ is not displayed.
❼ .