JUKI DDL-9000C-F Instruction Manual page 121

② Selecting the new condensation custom creating function
❷
<Condensation custom pattern list screen>
③ Inputting the condensation custom number
❸
<New condensation custom pattern creation pattern
number input screen>
④ Creating a condensation custom
A B
❻
Number of stitches
<Condensation custom edit screen>
❹ ❺
Pitch
❻ ❼
– 117 –
Registered condensation custom patterns are
displayed on the screen.
❷ .
Press
The "new condensation custom pattern cre-
ation pattern number input screen" is dis-
played.
1. Enter the number of destination pattern for
copying with numeric keypad ❸ .
An unassigned registration number that
is closest to the entered value in the plus/
minus direction is displayed by pressing
❹ .
❺ .
2. Press
The "condensation custom edit screen" is
displayed.
In the case the entered number has already
been registered, the prompt message for
overwrite confirmation is displayed.
1. Press ❻ to put the step you have pressed
in the selected state.
2. The selected condensation custom num-
ber is displayed in A and the step number
which is being edited, and the total number
of steps are displayed in B.
3. The "number of stitches" and "pitch" for the
step are displayed in ❻ . Press ❻ to put the
displayed data in the selected state.
Previous step number screen or the next
step number screen is displayed with
❼ .
4. "Condensation custom data input screen"
is displayed by pressing ❻ while the step is
being selected.