Beep Sound - Alinco DR-138 Instruction Manual

beep sound

The beep provides confirmation of entry, error status or malfunctions of
the transceiver. You can enable or disable beep sounds.
1.
Press and hold key for over 2s to
enter setting menu.
2.
Press / key to choose No.18
CALL MONI
menu, LCD displays"BEEP--ON".
3.
Turn selector knob to select the desired
setting.
ON:Enable beep sounds.
OFF:Disable beep sounds.
4.
Press key to confirm and exit.
TS/DCS
TOT (Time-out timer)
TOT prohibits the users from transmitting after a certain period of time
has elapsed. When the time is over,transmitting stops and automatically
returns to receiving. Until the PTT is released once and pressed again,
the radio will not transmit.
1.
Press and hold key for over 2s to enter setting menu.
2.
Press / key to choose No.19
CALL MONI
menu, LCD displays"TOT--3"
3.
Turn selector knob to select the desired
timer setting.
Timer:1-30min,each level 1min
OFF: Disable TOT
4.
Press key to confirm and exit.
TS/DCS
APO (Auto power off)
Once APO is activated, the radio will be automatically switched off
when the pre-set time is elapsed.
1.
Press and hold key for over 2s to
MONI
enter setting menu.
2.
Press / key to choose No.20
CALL MONI
menu, LCD displays"APO--OFF".
3.
Turn selector knob to select the desired
setting.
30MIN:Auto power off after 30m
1HOUR:Auto power off after 1h
2HOUR:Auto power off after 2h
OFF:Disable Auto power off
4.
Press key to confirm and exit.
TS/DCS
DTMF Transmitting Time
1.
Press and hold key for over 2s to
enter setting menu.
2.
Press / key to choose No.21
CALL MONI
menu, LCD displays"SPD--50".
3. Turn selector knob to select the desired setting, in miliseconds.
30/50/100/200/300/500, which indicates the time for sending each
DTMF signal & the interval between each DTMF being sent.
4. Press key to confirm and exit.
TS/DCS
22