Busy Channel Lockout - Alinco DR-138 Instruction Manual

3. Turn selector knob to select the desired
setting .
On:In current channel,Press PTT to
transmit
OFF:In current channel,Press PTT is
invalid.
4. Press key to confirm and exit.
TS/DCS

Busy Channel Lockout

BCLO is to disable transmitting while RX signal is received. Once the
channel is busy and you press PTT, the radio will beep as warning and
get back to receiving.
1.
Press and hold key for over 2s to
enter setting menu.
2.
Press / key to choose No.10
CALL MONI
menu, LCD displays"LOCK--OFF".
3.
Turn selector knob to select the desired
setting.
BU: Enable BCLO, Carrier lockout, transmitting is inhibited when
current channel receives a matching carrier.
RL: Enable BTLO, transmitting is inhibited when current channel
receives a matching carrier but dis-matching CTCSS/DCS.
OFF: Busy channel lockout is disabled.It can transmit in any
receiving status.
4.
Press key to confirm and exit.
TS/DCS
Editing Channel NAME
(Available only in Memory mode)
1.
In memory-mode, press and hold
key for over 2s to enter setting menu.
2.
Press / key to choose No.11
CALL MONI
menu, LCD displays cursor and flashing.
3.
Turn selector knob to select the desired letter,press
confirm selected letter and enter into next edition,Press
return forward edition.
4.
After edition,press key to exit.
MHz
In Frequency (VFO) mode, this function will be auto-hidden.
Reverse TX/RX
TX frequency turns to RX frequency & RX frequency changes to TX
frequency. CTCSS/DCS setting is respected also.
1.
Press and hold key for over 2s to enter setting menu.
2.
Press / key to choose No.12
CALL
MONI
menu, LCD displays "REV—OF".
3.
Turn selector knob to select the desired
setting.
ON:Enable Frequency Reverse
OFF:Disable Frequency Reverse.
4.
Press key to set and exit.
TS/DCS
8
key to
TS/DCS
to
20