High/Mid/Low Power Selection - Alinco DR-138 Instruction Manual

8
If select "SQ",it indicates you can hear the calling from caller when
receive a matching carrier.
If LCD displays "CTC",it indicates
you can hear the calling from caller
when receive a matching carrier and
CTCSS/DCS signaling .
If LCD displays "TON",it indicates
you can hear the calling from caller
when receive a matching carrier and
DTMF/2TONE/5TONE signaling .
If LCD displays "C/T",it indicates you
can hear the calling from caller when
receive a matching carrier and CTCSS/
D C S a n d D T M F / 2 TO N E / 5 TO N E
signaling .
19
If LCD displays "C/T",it indicates you can hear the calling from
caller when receive a matching carrier and either CTCSS/DCS
DTMF/2TONE/5TONE signaling. .
4.
Press key to confirm and exit.
TS/DCS
This setting will be set together with adding optional signaling
and CTCSS/DCS.

HIGH/MID/LOW Power Selection

1.
Press and hold
enter setting menu.
2.
Press / key to choose No.07
MONI
CALL
menu, LCD displays"POW--HI".
key for over 2s to
3. Turn selector knob to select the desired setting.
HI: High TX Power
MI : Middle TX Power
LOW: Low TX Power
4.
Press key to confirm and exit. This feature is the same as
TS/DCS
[FUNC]+[H/L] key operation.
Band-width Selection
Select suitable bandwidth in accordance with your local band-plans.
1.
Press and hold key for over 2s to enter setting menu.
2.
Press / key to choose No.08
CALL MONI
menu, LCD displays"BAND--25".
3. Turn selector knob to select the desired
setting.
25: band width is 25k(Wide band)
20: band width is 20k(Middle band)
12:band width is 12.5k(Narrow band)
4.
Press key to confirm and exit.
TS/DCS
TX OFF SETUP
This function is to prohibit the transmission and to use the radio as a
receiver.
1.
Press and hold key for over 2s to enter setting menu.
2.
Press / key to choose No.09 menu, LCD displays"TX-
CALL MONI
ON".