Ext. Power jack
Fixed Station Operation
In order to use this transceiver for fixed station operation, you will
need a separate 13.8V DC power supply (not included) , Please
contact local dealer to require.
The recommended current capacity of your power supply is 12A or more.
1.
Connect the DC power cable to the regulated DC power supply
and ensure that the polarities are correct. (Red: positive, Black:
negative).
Never directly connect the transceiver to an AC outlet.
Use the supplied DC power cable to connect the transceiver to a
regulated power supply.
Do not substitute a cable with smaller gauge wires.
Black
DC power cable with fuse holder
ACC terminal
Cigar-Plug connection
Regulated
power supply
Red
Initial Installation
2.
Connect the transceiver's DC power connector to the connector
the DC power cable.
Press the connectors firmly together until the locking tab clicks
Before connecting the DC power to the transceiver, be sure to switch
the transceiver and the DC power supply OFF.
Do not plug the DC power supply into an AC outlet until you make all
connections.
3
on
.
4