Sending 2-Tone Call - Alinco DR-138 Instruction Manual

In 5Tone signaling mode,press
"AN---",turn selector knob to select desired digit(caller ID).In
this mode,press to confirm exist digit and move cursor to
TS/DCS
next,press to forward cursor.After editing,press
V/M
operate ANI call.
4.
Press key to confirm and exit
TS/DCS

Sending 2-Tone Call

1.
Press and hold key for over 2s to enter setting menu.
2.
P r e s s / k e y t o c h o o s e
MONI
CALL
No.03 menu, LCD displays "2TON
XX","XX"indicates the group in the list.
3. Turn selector knob to select the desired
sending 2TONE group,Press PTT to
transmit selected group.
4. Total:32groups,00-31,Default:00.
5.
Press key to confirm and exit.
TS/DCS
Content and name of 2TONE will be edited by programming
software.
This radio only query edited group or name.If there is
corresponding name for 2TONE,this operation will display 2TONE
corresponding name.
Sending 5-Tone Call
1. Press and hold key for over 2s to enter setting menu.
2.
Press / key to choose No.04 menu,
CALL MONI
LCD displays "5TON XX","XX"indicates the
group in the list.
for 2s until LCD displays
CALL
key to
CALL
3. Turn selector knob to select the desired sending 5TONE group,
Press [PTT] to transmit selected group.
4.
Total:100groups,00-99,Default:00.
5.
Press key to confirm and exit.
TS/DCS
Content and name of 5TONE will be edited by programming
software.This radio only query edited group or name.If there is
corresponding name for 5TONE,this operation will display 5TONE
corresponding name.
Sending DTMF call
1.
Press and hold key for over 2s to enter setting menu.
2.
Press / key to choose No.05 menu, LCD displays "DTMF
CALL MONI
XX", "XX" indicates the group in the list.
3.
Turn selector knob to select the desired
sending DTMF group,Press PTT to
transmit selected group.
4. Total:16groups,00-16,Default:00.
5.
Press key to confirm and exit.
TS/DCS
Signaling Combination setup
This function is to improve the level of protecting the radio against
receiving irrelative signal.
1.
Press and hold key for over 2s to
enter setting menu.
2.
Press / key to choose No.06
CALL MONI
menu, LCD displays "SPK--SQ".
3.
Turn selector knob to select the desired
combination.
8
18