Pin Setup - Alinco DR-138 Instruction Manual

2.
Press / key to choose No.26 menu, LCD displays"DSP—
CALL MONI
FR".
3.
Turn selector knob to select the desired
mode.
FR: Frequency+Memory mode.
CH:Channel mode.
NM:Channel+Name Tag mode,if channel
not named,it displays Frequency+Memory
mode.
4.
Press key to confirm and exit.
TS/DCS
This function may not be available in dealer-programmed units.

PIN Setup(

Useless if PIN is not assigned
Enable this function,you have to insert a matching PIN to enter into
normal status when radio is turned on.(The PIN can be assigend by
programming software only.)
1.
Press and hold key for over 2s to
enter setting menu.
2.
Press / key to choose No.27
CALL MONI
menu, LCD displays "CODE-OF".
3. Turn selector knob to enable/disable Pin
setup.
ON: Turn on Pin setup
OFF:Turn off Pin setup
4.
Press key to confirm and exit.
TS/DCS
)
Address list
You store desired ID and corresponding ID name in address list.The
LCD displays ID corresponding name if radio received ANI calling and
find matching ID in address list .
1.
Press and hold key for over 2s to
enter general setting menu.
2.
Press / key to choose No.28
MONI
CALL
menu, LCD displays"BOOK".
3.
Press to enter into ID setting,press
MHz
/ t o s e l e c t t h e d e s i r e d
CALL MONI
group (00-127,total is 128 group ID).
Turn selector knob to select desired
number,press confirm and move
TS/DCS
cursor to next edition,press
clear out all digits.
4.
After finishing edition,press to confirm and enter into edition of
current group's ID corresponding name.Turn selector knob to select
desired letter,press
TS/DCS
to clear out all letters. 00-127,total 128 group ID and corresponding
ID name.
5. Press to confirm and return into main menu.Repeat above
MHz
Step 3 and Step 4 operations to edit multi-ID and corresponding ID
name.
6.
Press key to return into standby status.
TS/DCS
RESET
If your radio seems to be malfunctioning, resetting the microprocessor
may solve the problem. When performing the reset, you may lose
memory data and stored information. Back up or write down important
data before performing the reset.
General Setting
to
to move cursor to next edition,Press
8
24