Turn Underline On/Off (Hangul Extension) - Printronix P7000 H-Series Programmer's Reference Manual

For the p7000 h-series of line matrix printers

Hide thumbs Also See for P7000 H-Series:

Table of Contents

Chapter

Configuring The KSSM Emulation With Control Codes

Turn Underline On/Off (Hangul Extension)

ASCII Code FS - n

Hex Code

Dec Code

Purpose

Comment

1C 2D n

28 45 n

Turns on/off printing of a line below all characters and spaces

following the command:

n = 0 or 48Turns underline off

n = 1 or 49Prints one dot underline

n = 2 or 50Prints two dot underline

Where:

n = 0, 1, 48, 49

If the character is in vertical printing mode, the line prints over

the character and becomes overscored.

Underline and overscore each increase 4/180 inch line spacing.

The default is Normal (non-underlined) style.

Table of Contents

Psa3 kssm emulation