Select Italic Font; Cancel Italic Font; Select Print Quality - Printronix P7000 H-Series Programmer's Reference Manual

Select Italic Font

ASCII Code ESC 4
Hex Code 1B 34
Dec Code 27 52
Purpose Sets the style attribute of the font to Italics.
Comment This command selects italic printing even if the italic character
table is not selected.
This command affects "Italic Print" on the front panel.
The default is Normal (non-italic) style.

Cancel Italic Font

ASCII Code ESC 5
Hex Code 1B 35
Dec Code 27 53
Purpose Sets the font style to Normal (cancels the italic style previously
selected with the ESC 4 command).
Comment This command affects "Italic Print" on the front panel.
The default is Normal (non-italic) style.

Select Print Quality

ASCII Code ESC x n
Hex Code 1B 78 n
Dec Code 27 120 n
Purpose Selects the print quality according to the following values:
n = 0 or 48Hi-Speed
n = 1 or 49LQ
n = 2 or 50Near LQ
n = 3 or 51Super Hi-Speed
n = 4 or 52Normal
n = 5 or 53Ultra Hi-Speed
Where:
n = 0, 1, 2, 3, 4, 5, 48, 49, 50, 51, 52, 53
Comment This command affects the front panel setting of "Typeface."
Select Italic Font
63