Chapter
3
Configuring The KSSM Emulation With Control Codes
Select Double-width Printing (One Line)
ASCII Code SO
Hex Code
Dec Code
Purpose
Comment
Cancel Double-width Printing (One Line)
ASCII Code ESC SO
Hex Code
Dec Code
Purpose
Comment
Cancel Double-width Printing (One Line)
ASCII Code DC4
Hex Code
Dec Code
Purpose
Comment
60
0E
14
Doubles the width of all characters, spaces, and intercharacter
spacing (set with the ESC SP command) on the same line as
the command.
This command is cancelled when the printer receives the
following commands: LF, FF, VT, DC4, ESC W 0, and CR.
This command works under both ASCII and Hangul modes.
The default is Normal (non double-width) printing.
1B 0E
27 14
Cancels the double-width printing of all characters, spaces, and
intercharacter spacing (set with the SO command).
This command works under both ASCII and Hangul modes.
14
20
Cancels double-width printing selected by the SO or ESC SO
commands.
This command does not cancel double-width printing selected
with the ESC W command.
The default is Normal (non double-width) printing.