Cpi/Lpi Select; Host Command - Printronix P7000 H-Series Programmer's Reference Manual

Chapter 2
The Configuration Menu
Page Format
(from the
previous page)
Form Length
Abs. Length IN
11.0* inches
(0.1-24)
Abs. Length MM
279.4* mm
(0.1-609.6)
Funct. of Lines
66* lines
(1-192)

CPI/LPI Select

This parameter lets you specify the characters per inch (cpi) and lines per
inch (lpi) values. The defaults are:
•
Select CPI - 10.0 cpi
•
Select LPI - 6.0 lpi
•
DBCS CPI - 6.0 cpi

Host Command

•
Enable. The default. Enables all host printing commands.
•
Ignore All. This function treats all control codes and printing commands
as the data.
•
Ignore CPI. This function ignores the CPI selection commands only
(e.g., ESC M, ESC P, and ESC G).
•
Ignore LPI. This function ignores the LPI selection commands only
(e.g., ESC 2 and ESC 0).
•
Ignore Unidir. All unidirectional commands sent by the host are ignored
by the printer.
•
Ignore Pg. Fmt. This function ignores all page format setting commands
sent from the host.
22
Form Width Margins
Abs. Width IN Left Margin
13.6* inches 0* columns
(0.1-13.6) (0-369)
Abs. Width MM Right Margin
0* columns
345.4* millimeters
(0-369)
(0.1-345.4)
Funct. of CPI Bottom Margin
163* Characters 0* lines
(1-272) (0-451)
Perforation
Skip
Disable*
1/2 inch
2/3 inch
5/6 inch
1 inch