Chapter
3
Configuring The KSSM Emulation With Control Codes
Cancel Vertical Printing (Select Horizontal Printing)
ASCII Code FS K
Hex Code
Dec Code
Purpose
Comment
Set n /60-inch Line Spacing
ASCII Code ESC A n
Hex Code
Dec Code
Purpose
Comment
Set n /180-inch Line Spacing
ASCII Code ESC 3 n
Hex Code
Dec Code
Purpose
Comment
66
28 4B
1C 75
Prints all characters horizontally.
This command cancels vertical printing set with the FS J
command.
This is the default setting at power-up.
The default is Normal (horizontal).
1B 41 n
27 65 n
Sets the line spacing to n /60 inch.
Where:
0 < n <= 85
Changing the line spacing does not affect previous settings for
vertical tabs or page length.
Does not support 0 lpi. When n = 0, the printer prints according
to the previous LPI.
This command affects the front panel setting of "Select LPI."
1B 33 n
27 51 n
Sets the line spacing to n /180 inch.
Where:
0 < n <= 255
Changing the line spacing does not affect previous settings for
vertical tabs or page length.
Does not support 0 lpi. When n = 0, the printer prints according
to the previous lpi.
This command affects the front panel setting of "Select LPI."