Select Dbcs Print Quality; Select Double-Strike Printing; Cancel Double-Strike Printing - Printronix P7000 H-Series Programmer's Reference Manual

Select DBCS Print Quality

ASCII Code FS x n
Hex Code 1C 78 n
28 120 n
Dec Code
Purpose Selects different print quality according to the following values:
n = 0 or 48LQ
n = 1 or 49Hi-Speed
n = 2 or 50Near LQ
n = 3 or 51Super Hi-Speed
n = 4 or 52Normal
n = 5 or 53Ultra Hi-Speed
Where:
n = 0, 1, 2, 3, 4, 5, 48, 49, 50, 51, 52, 53
Comment This command affects the front panel selection of "Typeface."
This command only works in DBCS mode.
The default mode is according to the setting of front panel.

Select Double-strike Printing

ASCII Code ESC G
Hex Code 1B 47
Dec Code 27 71
Purpose Prints each dot twice, with the second slightly below and right to
the first, creating a bolder character.
Comment The default is Normal (non double-strike) style.

Cancel Double-strike Printing

ASCII Code ESC H
Hex Code 1B 48
Dec Code 27 72
Purpose Cancels double-strike printing selected with the ESC G
command.
Comment The default is Normal (non double-strike) style.
Select DBCS Print Quality
59