Select Bold Font; Cancel Bold Font; Select Character Style - Printronix P7000 H-Series Programmer's Reference Manual

Chapter 3
Configuring The KSSM Emulation With Control Codes

Select Bold Font

ASCII Code ESC E
Hex Code
Dec Code
Purpose
Comment

Cancel Bold Font

ASCII Code ESC F
Hex Code
Dec Code
Purpose
Comment

Select Character Style

ASCII Code ESC q n
Hex Code
Dec Code
Purpose
Comment
56
1B 45
27 69
Sets the weight attribute of the font to Bold.
This command increases the weight of printed lines and
characters, resulting in bolder printing.
This command affects "Bold Print" on the front panel.
The default is Normal (non-bold) print.
1B 46
27 70
Sets the font to Normal (cancels the bold print previously set
with the ESC E command).
This command affects "Bold Print" on the front panel.
The default is Normal (non-bold) print.
1B 71 n
27 113 n
Turns on/off outline and shadow printing, according to the
parameters below:
n = 0 Turns off outline/shadow printing
n = 1Turns on outline printing
n = 2Turns on shadow printing
n = 3Turns on outline and shadow printing
Where:
0 <= n <= 3
This command does not affect graphics characters.